Description
Scent: Fragrance-free
Volume: 100 mL
Ingredients: Ultra-pure water, potassium hydroxide, sodium hypochlorite, thickener.
pH value: 13±1
Shelf life: 2 years, manufacturing date is marked on the packaging
This product is a gel formula. Upon exposure to air after opening, hydration may occur, which is a normal physical change.
To maintain optimal performance, it is recommended to use the product within six months after opening.
Deep Mold Removal Gel: Powerfully Eliminates Stubborn Mold Roots
- Utilizes an exclusive encapsulation technology, allowing sodium hypochlorite to effectively penetrate and break down mold roots, achieving mold removal and preventing regrowth.
- High-adhesion gel technology ensures the gel adheres tightly to surfaces without dripping.
- Fragrance-free, non-irritating design is more user-friendly and does not damage surfaces such as silicone, tiles, etc.
- Applicable materials: Silicone sealant in bathtubs, sinks, windowsills, kitchen counters, shower glass doors, and moldy areas in tile grout and rubber seals.
- Materials to avoid: Please avoid using on wood, metal, wool, nylon, silk, dyed fabrics, rubber, latex, synthetic rubber, synthetic PVC veneers, melamine, marble, quartz, artificial stone, electroplated stainless steel, pure stainless steel, painted surfaces, and other easily faded materials.
- If uncertain about the material's tolerance, please perform a localized test for 15-30 minutes in an inconspicuous area to check for discoloration or fading. If any occurs, it is not recommended to use.
- For materials other than silicone sealant, let sit for 30 minutes, then scrub and rinse off.
- Since building materials, age, and wear vary in each home, it is always safest to perform a localized test as described in point 3.
How to Use:
Ensure ventilation and that the application surface is dry.
Squeeze the gel to completely cover the mold-affected area.
Let sit for 30 minutes, then rinse with water (do not use hot water) and wipe dry. If necessary, use a cleaning tool to assist.
※ For deep-seated mold on silicone sealant, it is recommended to let it sit for 5 hours or more to enhance gel penetration for better mold removal.
Precautions:
1. As the product is alkaline, it is recommended to wear gloves when handling for sensitive skin.
2. The cleaning agent is encapsulated within the gel, making it almost odorless. However, a slight scent may be released after spreading or rinsing. Individuals with sensitivities are advised to wear a mask.
3. Ensure good ventilation during use and avoid mixing with general cleaning agents or acidic substances to prevent the generation of harmful gases.
4. Avoid contact with skin and eyes. If contact occurs, rinse immediately with plenty of water. If discomfort persists, seek medical attention.
5. Store in a cool place away from direct sunlight and out of reach of children and pets.
6. Do not flush the gel down the toilet during use.
7. If you are concerned about surrounding areas being discolored, please tape them off beforehand.
1. As the product is alkaline, it is recommended to wear gloves when handling for sensitive skin.
2. The cleaning agent is encapsulated within the gel, making it almost odorless. However, a slight scent may be released after spreading or rinsing. Individuals with sensitivities are advised to wear a mask.
3. Ensure good ventilation during use and avoid mixing with general cleaning agents or acidic substances to prevent the generation of harmful gases.
4. Avoid contact with skin and eyes. If contact occurs, rinse immediately with plenty of water. If discomfort persists, seek medical attention.
5. Store in a cool place away from direct sunlight and out of reach of children and pets.
6. Do not flush the gel down the toilet during use.
7. If you are concerned about surrounding areas being discolored, please tape them off beforehand.
